CE certified cable
  • Flexible Optical Fibre Cable

Flexible Optical Fibre Cable

Flexible optical fibre cable for microduct installation by blowing

EMAILEMAIL:info@aein-cable.com

Product introduction
  • 01 Product application

    Flexible optical fibre cable for microduct installation by blowing



  • 02 Product characteristics

    Maximum tension during installation (24- 48 fibres): 750 N

    Maximum tension during installation (96 - 192 fibres): 1 000 N

    Temperature range during installation: -15 - +60 ºC

    Temperature range during operation, storage, transport: -40 - +70 °C

    Crush strength with 100 mm plate: 500 N

    Reaction to fire (CPR): Fca

    Minimum bending radius: During installation 20 x diameter, installed 15 x diameter

  • 03 Technical certification ·RoHS Compliant
    ·Complies with 2014/35/EU-Guidelines ("Low Voltage Directive") CE.
         • We are pleased to produce special versions, other dimensions, core and jacket colours on request.
Product structure

Optical fibres: Coloured single-mode fibres according to the ITU-T G.652.D.

Secondary coating: Flexible colour coded fibre modules. Fibres are housed in thin walled tubes made of soft elastomeric material (polyester elastomer).

Fillers: Plastic fillers when applicable.

Central strength member: Glass fibre reinforced plastic (FRP).

Cable core stranding: The fibre tubes and fillers (when needed) are SZ-stranded around the central strength member.

Water blocking: Dry water blocking elements are applied to the cable core.

Rip cord: A non-metallic rip cord is applied under the sheath.

Outer sheath: UV resistant black polyethylene compound (HDPE). Nominal sheath thickness is 0,6 mm.

Sheath marking: Marking printed on the sheath at one meter interval: Nestor Cables - cable type - lot number - year of manufacture - length marking.

All of our fibre optic and copper cables are halogen-free.


Related products