THHN/PVC, type TC Power Cable is used to supply power to motors, or for connection to other power devices in industrial settings. Primary installations include cable trays, raceways, and outdoor locations where supported by a messenger wire. Type TC Power Cable is listed for direct burial and for use in Class 1, Division 2 hazardous locations and Class 1 control circuits. This cable may be used at temperatures not to exceed 75°C in wet locations and 90°C in dry locations.
EMAIL:momo.tao@aein-cable.com
THHN/PVC, type TC Power Cable is used to supply power to motors, or for connection to other power devices in industrial settings. Primary installations include cable trays, raceways, and outdoor locations where supported by a messenger wire. Type TC Power Cable is listed for direct burial and for use in Class 1, Division 2 hazardous locations and Class 1 control circuits. This cable may be used at temperatures not to exceed 75°C in wet locations and 90°C in dry locations.
Heat, moisture and sunlight resistant
Conductor: Soft annealed bare copper, Class B stranding
Insulation: Polyvinyl chloride (PVC) insulation over with a nylon (polyamide) jacket applied
Ground Wire: Soft annealed bare copper, Class B stranding
Assembly: Three or more conductors will be cabled round with fillers and a nylon rip cord is put under the jacket for ease of stripping
Jacket: Heat, moisture and sunlight resistant PVC(LSOH is available upon request)
Color: Upon request
XHHW / XLPO, Type TC Control Cable