Steel Wire Handle Cable
  • Double wire hoist handle cable  RVV2G

Double wire hoist handle cable RVV2G

Electric hoist and arm controller connection cable, widely used in dry or wet indoor can be forced to guide the left and right non-continuous motion installation, such as electric hoist, driving and inspection equipment, self-supporting shaft or inclined shelves, cranes, ports and other occasions. The outer sheath can be customized according to different climatic conditions and use occasions, so this product can also be used in the open air.

EMAILEMAIL:momo.tao@aein-cable.com

Product introduction
  • 01 Product application

    Electric hoist and arm controller connected cable, widely used in dry or wet indoor, can be forced to guide the installation of left and right non-continuous movement, such as electric hoist, driving and inspection equipment, self-supporting shaft or inclined shelf, crane, port and other occasions. The outer sheath can be customized according to different climatic conditions and use occasions, so this product can also be used in the open air.

  • 02 Product characteristics· Water and oil resistance · Wear resistance
    · Load-bearing tensile resistance
  • 03 Technical certification· Customization is acceptable for products with special structures, other sizes, cores and colors of sheathing
Product structure

Conductor material: multi-strand fine stranded oxygen-free bare copper wire; Meets VDE0295 CLASS 5 or 6 standards

Insulation: High quality mixed elastomer nitrile material soft insulation

Color identification: color core wire or black wire body white number, more than 3 core with yellow/green two-color ground wire

Reinforcement: multiple jute rope filling, one or two torsion-free self-bearing steel wire to carry the running tension

Core structure: anti-torsional structure layered

Lining layer: Flexible non-woven wrapped wire body buffer

Sheath material: Special mixed weather resistant elastomer nitrile material

Jacket color: Black (RAL9005) Grey (RAL7001) Orange (RAL2003)

Rated voltage :≤1.5mm²:300/500V, >1.5mm²:450/750V

Test voltage :≤1.5mm²:2500V, >1.5mm²:3000V

Small bending radius: fixed laying :10×D(cable outer diameter); Mobile installation :12×D(cable outer diameter)

Operating temperature: Fixed laying :-30℃ to +80℃; Mobile installation :-20℃ to +80℃(customizable -55℃ to +105℃)

Radiation resistance :8x107cJ/kg

Flame retardant: according to IEC60332-1 or -2

Product ID :Aein beike SHANGHAI AEIN WIRE & CABLE CO.,LTD Model Specification Voltage

Product parameter

Related products