It is suitable for fixed installation and occasional bending situations where there is free and non-continuous reciprocating movement without tensile load. It is suitable for torsional applications in dry or damp Spaces subjected to moderate mechanical loads, with typical application scenarios being the bridging areas in wind turbines (WTGS).
It is suitable for fixed installation and occasional bending situations where there is free and non-continuous reciprocating movement without tensile load. It is suitable for torsional applications in dry or damp Spaces subjected to moderate mechanical loads, with typical application scenarios being the bridging areas in wind turbines (WTGS).
Conductor material: Bare copper wire
Conductor grade: Complies with IEC60228 cl.5 standard
Core wire insulation :PVC-J-80-005
Core wire marking :< 0.5mm ²: For cables with 5 cores and below, color separation is used for distinction, in accordance with n.DIN 47100. For multi-core cables with more than 5 cores, color separation is used for core wires, with white ink dots for distinction. ≥ 0.5mm ² Cables with 5 cores or fewer are distinguished by color separation, including yellow and green wires, in compliance with n.DIN 47100. For multi-core cables with more than 5 cores, black core wires are used and distinguished by white ink numbers (customized as needed if there are special requirements).
Stranding: Layered stranding
Outer sheath material :DOPVC-H-80-005
Outer sheath color: Grey RAL 7001
Rated voltage :300/500 V
Test voltage :2 kV
The minimum bending radius is fixed at 4xd
The small bending radius moves 15 xd
The temperature rating is fixed at -40°C/+80°C
Temperature range: -5°C/+80°C
Operating temperature: + 80 °C Short-circuit temperature of +150℃
Standard: Complies with EN 50525-2-51
Product Identification :Aein beike SHANGHAI AEIN WIRE & CABLE CO.LTD Model Specification Voltage CE meter mark